Anyone who has ever held a 3D pen knows the first ten minutes are awkward. The plastic curls, the lines wander, and your ambitious dragon turns into abstract art. Good templates fix most of that by giving you a printed guide to trace while you learn speed control and steady hands.
This roundup covers stencil books, silicone mats, full starter kits, and project-specific patterns for kids and adults alike. Some picks pair with any pen you already own, while others bundle filament or a work surface too. Whatever your skill level, there’s a setup here that shortens the learning curve without much cost.
The Shortlist At A Glance
20 Sheets 3D Printer Drawing Molds Paper Stencils Set
MYNT3D Pro 3D Pen + 10 Color PLA + DesignPad Mat Kit
RZXYYGS 3D Pen Stencils with 2 Finger Caps, 40 Patterns
3Dmate 3D Pen Filament with Silicon Design Mat, 360 Feet PLA
3Dmate Starter Transparent 3D Pen Mat 9 x 7 Inches with Stencils Book
3Dmate 3D Pen Paper Stencils for Flower Pot, Pen Holder, Bird House
3Dmate Starter Transparent 3D Pen Mat 9 x 7 Inches
Vomika 3D Pen Printing Drawing Book, 40 Pattern Templates
Vomika 3D Pen Painting Drawing Book, 40 Pattern Thick Paper Templates
Vomika 3D Pen Printing Templates, 20 Sheets Printer Drawing Graffiti
More Details On Our Top Picks
Loose sheets get lost in a busy craft drawer, which is why a 20-sheet pack with 40 distinct patterns feels generous for the money. You lay a sheet down, trace over the printed outlines, and build flat shapes you can later weld into standing figures.
The included clear plate matters more than it sounds. Hot plastic peels cleanly off smooth plastic far easier than off paper, so your finished pieces stay intact instead of tearing. For anyone working at a kitchen table with a brand-new pen, this set removes most of the early frustration.
Strong Points
- 40 different patterns keep practice sessions fresh for weeks rather than days
- The clear plastic plate lets hot filament release without ripping delicate shapes
- Paper format works with essentially any 3D pen brand you already own
- Low cost makes it an easy add-on to a pen gift
Worth Noting
- Individual sheets can slide during tracing, so taping them to the table helps
- Heavy reuse wears the print edges, and replacements mean buying the whole pack again
Key Specs
Who It Suits Best
Absolute beginners on a budget who want maximum pattern variety from their first accessory purchase.
Where Another Pick Suits Better
Shoppers wanting a bound, harder-to-lose format will prefer the Vomika 3D Pen Printing Drawing Book instead.
This is the pick for someone past the toy stage. Unlike the paper-only sets around it, the MYNT3D Pro bundle pairs an adjustable pen with vacuum-sealed PLA refills in ten colors and a dedicated DesignPad work mat, so nothing else needs to be bought before the first doodle.
The Pro pen offers stepless speed control, meaning the feed rate adjusts smoothly rather than in fixed steps, which translates directly into thinner, cleaner lines. Discrete temperature adjustment widens material compatibility beyond basic PLA, and the replaceable sealed nozzle design supports long service life since clogged tips can be swapped instead of scrapping the pen.
Best Bits
- Stepless speed dial gives fine line control once your hand steadies
- Ten PLA colors arrive sealed, so filament stays dry until used
- Swappable nozzle design extends usable life compared with fixed-tip pens
- Everything ships together, eliminating compatibility guesswork
Small Caveats
- Higher upfront spend than template-only packs, which stings if the hobby fades
- Nozzle maintenance adds a small upkeep routine absent from simpler pens
Made For
Committed hobbyists and teens who want pro-level control and a complete kit in one order.
Consider Something Else When
Youthful first-time users may find the RZXYYGS stencils with finger caps a gentler, cheaper entry point.
Nozzle ends run hot enough to surprise careless fingers, and that is where this RZXYYGS set earns its place. Two silicone finger caps ship alongside the 20-page, 40-pattern stencil book, giving nervous newcomers and younger crafters a physical buffer while they learn.
The reusable transparent PVC drawing board sits under or over the pages for tracing, similar in spirit to the plate bundled with the ANIUHL set but framed as a durable board rather than a loose sheet. Patterns skew cute and approachable, which suits after-school projects and rainy-day sessions. In our view, the safety angle alone justifies choosing this over plainer packs for households with kids.
Bright Spots
- Finger caps reduce accidental contact burns during long practice runs
- Reusable PVC board withstands repeated sessions better than disposable paper alone
- Beginner-friendly pattern mix builds confidence quickly
Things To Consider
- Caps fit adult fingers loosely on some hands, so check sizing expectations
- Cartoon-heavy designs may feel juvenile to teens chasing realistic models
Right Fit For
Parents introducing 3D drawing to children who need both structure and burn protection.
Not Your Match When
Adults wanting functional objects should look at the 3Dmate flower pot and birdhouse stencil set instead.
Templates are useless once the filament spool runs dry mid-project, so this 3Dmate kit attacks the supply problem head-on. You get 360 feet of 1.75mm PLA spread across 36 colors, which works out to weeks of doodling for a household that crafts regularly.
The heat-resistant silicone mat measures 7 by 9 inches with a 3mm thickness, and its two faces serve different jobs: one side sits smooth for flat tracing, while the grooved side grips work in progress. An 11-template stencil book and four finger protectors round out the box. Note that the pen itself is not included, so this suits owners of an existing compatible 1.75mm pen rather than absolute first-timers.
Highlights
- 36 colors remove the “wrong shade” excuse from any project
- Dual-surface mat handles both tracing and freehand building
- Silicone shrugs off hot plastic, so cleanup takes seconds
- Finger protectors add a safety margin for younger users
Trade Offs
- Pen sold separately, unlike the MYNT3D Pro all-in-one bundle
- 11 templates offer less variety than the 40-pattern books elsewhere here
At A Glance
Who Will Love This
Existing pen owners burning through single-color refills who want variety and a proper work surface.
A Better Fit Elsewhere
Complete beginners starting from zero will get more mileage from the MYNT3D Pro pen-and-filament kit.
Transparency changes how you trace. Because this 9-by-7-inch mat is see-through, you slip a pattern page underneath and follow the lines directly, a workflow the opaque mats in this list cannot match. Pairing the mat with its own stencil book means the system works out of the box.
The flexible, two-sided silicone construction tolerates direct contact with molten plastic, and being heat resistant means stray nozzle touches leave no scars. Families juggling multiple crafters will appreciate that the whole setup wipes clean with a damp cloth. Depending on how often you trace versus freehand, the included book may be a bonus or simply a nice starting point before you print your own patterns.
Reasons To Buy
- Clear surface lets you trace any printed page, not just bundled ones
- Two-sided silicone doubles usable life before replacement thoughts arise
- Bundled stencils give day-one projects without extra orders
- Wipes clean, keeping shared family tables presentable
Minor Gripes
- Flexible silicone can shift under aggressive strokes unless held or taped
- Smaller footprint limits large multi-piece builds
Quick Facts
Best Suited To
Mixed-age households where adults and kids share one tracing station.
Look Elsewhere When
Shoppers who already own a stencil collection may prefer the mat-only 3Dmate Starter version reviewed below.
Flat doodles eventually feel pointless, and this 3Dmate sheet set answers that with five genuinely useful end products: a flower pot, pen holder, school bus, birdhouse, and bicycle. Finishing something that holds pencils or plants gives kids a reason to care about clean lines.
The stencils are designed to align with the 3Dmate Base ecosystem, so alignment stays predictable when paired with that gear, though the mat itself ships separately here. Compared with the general-purpose Vomika books, these sheets trade quantity for depth, walking you through multi-part assemblies. One honest caveat: paper stencils are single-use in practice, since hot plastic tends to bond slightly to fibers, so treat each completed project as a consumable.
Plus Points
- Finished items have real desk and shelf utility, not just display value
- Multi-part builds teach assembly thinking beyond simple tracing
- Designed for compatibility with 3Dmate Base equipment
Honest Caveats
- Only five projects total, so the fun window is shorter than 40-pattern books
- Mat not included, requiring separate purchase for the intended setup
The Right Fit
Kids aged roughly eight and up who want a weekend project ending in a usable object.
Skip It When
Long-term practice variety matters more, in which case the ANIUHL 20-sheet pack stretches further.
Same mat as the earlier 3Dmate entry, minus the stencil book, which makes it the leaner option for anyone who already owns patterns or prefers designing their own. Teachers running STEM stations often fall into that camp, printing class-specific worksheets and slipping them under the clear surface.
The flexible, two-sided, heat-resistant silicone construction matches its sibling exactly, so durability expectations carry over: it tolerates hot filament, rolls up for storage, and cleans with a quick wipe. In classrooms and club settings, that low-maintenance profile matters more than bundled extras. The trade-off is obvious, though. Paying for a mat alone only makes sense when your template library already exists somewhere else.
Upsides
- Transparent design accepts any worksheet or printed pattern underneath
- Rolls for easy storage between activities or in a supply bin
- Heat-resistant silicone handles repeated hot-plastic contact
Softer Spots
- No templates included, so first-timers must source patterns separately
- Lightweight mat benefits from tape corners during energetic kid sessions
Who Should Grab It
Educators and experienced doodlers who own plenty of stencils and just need a reliable surface.
Another Choice May Suit
First-time households should step up to the bundled 3Dmate Starter with stencils book for a complete start.
Loose pages vanish; books do not. That single observation explains why this Vomika volume appeals to parents tired of fishing crumpled stencils from under the couch. Forty cartoon-style patterns bind into one book, with two plastic plates included for copying shapes at size.
The cartoon focus lands well with elementary-age artists, and the bound spine keeps everything in sequence so kids can flip back to favorites. Against the ANIUHL loose-sheet pack, you sacrifice some flexibility in exchange for organization, which most families consider a fair swap. One thing worth considering: the plates are thin plastic, so pressing hard with a hot nozzle close to the edge calls for a gentle hand.
What We Like
- Book binding prevents page loss, the classic loose-stencil failure mode
- Two plastic plates support simultaneous tracing and assembly work
- Cartoon catalog matches what younger kids actually want to draw
Room For Improvement
- Standard-weight pages show wear faster under daily tracing
- Style skews young, limiting appeal for older teens
Feature Snapshot
Whose Shelf It Belongs On
Families with elementary-aged kids who value tidy storage over expandable sheet libraries.
Reach For A Different Pick When
Heavier daily use calls for the upgraded Vomika thick-paper edition covered next.
Think of this as the refined sibling of the previous Vomika book. The layout and 40-pattern count carry over, but the pages move to thicker stock that resists curling and edge fraying when a hot nozzle lingers a beat too long along a line.
That upgrade shows up in ownership terms: pages lie flatter during tracing, which improves line accuracy, and the book survives being passed between siblings without looking ragged within a month. Owners commonly report that heavier paper also releases cooled plastic slightly more cleanly. The same two plastic plates are part of the package, keeping the workflow identical. Honestly, for households where the 3D pen comes out several times a week, the sturdier stock justifies choosing this version over the standard book.
Standout Traits
- Thick pages resist warping and tearing through heavy reuse
- Flatter tracing surface improves line precision for detail work
- Same convenient bound format and twin plates as the standard edition
Areas To Watch
- Costs somewhat more than the standard book for equivalent pattern count
- Still cartoon-oriented, so realistic-model builders will outgrow it
Built With In Mind
Regular crafters, families with multiple kids sharing one book, and anyone annoyed by flimsy pages.
Where A Sibling Pick Shines
Occasional users on tighter budgets get nearly the same experience from the standard Vomika drawing book.
Where the Vomika books chase cartoons, this graffiti-themed sheet set leans edgier, aimed at older kids and adults who want street-art energy in their builds. Twenty sheets carry bold, layered designs meant to be copied part by part onto the transparent plate.
The 1:1 scale copying approach deserves attention: because every element prints at true size, pieces traced separately join together without scaling surprises, which is a common headache with photocopied patterns. Each sheet is carefully laid out so complex artwork breaks into manageable segments. You may find the aesthetic polarizing in a household with mixed tastes, but for teens decorating bedrooms or desks, that edge is precisely the draw. Compared with the RZXYYGS set, this one trades safety accessories for attitude.
Positives
- True 1:1 scale parts assemble accurately without resizing guesswork
- Graffiti styling appeals to teens and adults bored of cartoon catalogs
- Layered designs teach multi-stage construction skills
- Clear copy plate included in the package
Points To Note
- No finger protection included, unlike the RZXYYGS starter pack
- Twenty sheets offer less total variety than 40-pattern books
Core Details
A Natural Fit For
Teenagers and design-minded adults who want statement pieces rather than cute desk toys.
Swap It Out When
Younger children are the primary user, making the RZXYYGS capped-and-cushioned set the safer call.
Choosing Between These 3d Pen Templates
Match The Format To Your Habit
Loose sheets suit occasional doodlers who file things away neatly, while bound books win for households where pages travel between rooms. Silicone mats occupy their own category entirely, since they protect furniture and accept any pattern underneath. Decide first whether you need guidance, a surface, or supplies, because most products here solve only one of those three problems well.
Count The Real Cost Of Ownership
A cheap stencil pack looks economical until filament runs dry or pages tear within weeks. Kits bundling refills, finger protection, or a reusable board spread their cost across months of use. Frequent crafters recover that difference quickly, while once-a-month users rarely do.
Think About Who Holds The Pen
Younger children benefit from finger caps, simple cartoon outlines, and forgiving surfaces. Teens and adults tend to outgrow cartoon catalogs fast, so themed sets like graffiti sheets hold their interest longer. Matching difficulty to skill keeps frustration low and sessions long.
Key Considerations Across These Picks
Wrong Turns To Avoid
The most common misstep is buying templates without checking filament compatibility, since some kits assume 1.75mm PLA and nothing else. Another frequent regret is ordering a mat-only product for a complete beginner who then lacks any patterns to trace. Read the included-items list twice before checkout.
The Upgrade Payoff
Higher-tier bundles earn their price through control and longevity: stepless speed dials, swappable nozzles, and sealed filament all extend usable life. Casual users rarely notice those refinements. Dedicated hobbyists feel the difference within a week, which is when spending up stops being optional.
Frequently Asked Questions
Do these templates work with any 3D pen brand?
Paper stencil books and clear plates are brand-neutral, so they pair with virtually any 3D pen. Bundled kits like the MYNT3D Pro are designed around their own hardware for best results.
Are paper stencils reusable?
They survive light reuse, but hot plastic gradually bonds to paper fibers and roughens the surface. Heavy users should expect to replace sheets or upgrade to a silicone mat.
Is a silicone mat really necessary?
It is not required, yet it protects tables from stray hot plastic and makes releasing finished pieces far easier. Most regular users consider it the first worthwhile accessory.
Can kids use these safely?
Yes, with supervision, since nozzle tips reach high temperatures. Sets including finger caps, such as the RZXYYGS pack, add a helpful layer of protection for younger users.
How much filament does a typical project consume?
Simple flat tracings use only a few feet, while layered multi-part builds can consume considerably more. That is why refill-rich kits appeal to frequent crafters.
Bottom Line
Start by matching the format to your household: bound books for tidiness, loose sheets for variety, mats for protection, and full kits for convenience. Beginners gain the most from the RZXYYGS or ANIUHL packs, while committed hobbyists should weigh the MYNT3D Pro bundle seriously. Whichever direction fits, any of these choices beats freehand guessing during those first wobbly sessions.